PeakTech 1240 Operation Manual page 6

3.3. Left side panel
1. Power switch:"―" represents power ON; "○" represents power OFF.
2. AC power input jack
3.4. Right side panel
1. USB Host port:
2. USB Device port: It is used to transfer data when external USB equipment connects to the oscilloscope
3. VGA port:
4. LAN:
1.
2.
Fig. 3 Right side panel
It is used to transfer data when external USB equipment connects to the oscilloscope
regarded as "Host equipment". For example: upgrading software by USB flash disk
needs to use this port.
regarded as "Device equipment". For example: to use this port when connect PC to the
oscilloscope by USB.
To connect the oscilloscope with a monitor or a projector as VGA output.
To integrate this oscilloscope into a network.
Fig. 2 Left side panel
-95-
1.
2.
3.
4.