PeakTech 1240 Operation Manual page 34

6. Alternate trigger (Trigger mode: Edge)
Alternate trigger (Trigger Type: Edge) Menu is shown as Fig. 34.
Alternate trigger (Trigger Type: Edge) Menu list:
MENU
Alternate Mode
Source
Couple
Slope
Mode
Holdoff
7. Alternate trigger (Trigger Mode: video)
Alternate trigger (Trigger Type: video) Menu is shown as Fig. 35.
Fig. 34 Alternate trigger (Trigger Type: Edge) Menu
SETTING INSTRUCTION
Edge Set vertical channel trigger type as edge trigger.
CH1 Select CH1 as the trigger source.
CH2 Select CH2 as the trigger source.
AC Not allow DC portion to pass.
DC Allow all portion pass.
HF Not allow high frequency of signal pass and only low
frequency portion pass.
LF Not allow low frequency of signal pass and only high
frequency portion pass.
Trigger in signal rising edge
Trigger in signal falling edge
Auto Acquire waveform even no trigger occurred
Holdoff 100ns~10s, adjust M knob to set time interval before another
trigger occur.
Reset Set Holdoff time as 100ns
Fig. 35 Alternate trigger (Trigger Type: video) Menu
-123-