Table of Contents
Advertisement
To use wave record function, do as follows:
1.
Press Save button.
Press H1 button, turn the M knob to choose Record.
2.
3.
Press H2 button. In the Mode menu, press F2 button to choose Record.
4.
Press H3 button. In the Frame Set menu, press F1 button and turn the M knob to set End frame; press F2
button and turn the M knob to select the interval between recorded frames.
5.
Press H4 button, choose whether to refresh the wave when recording.
6.
Press H5 button to start recording.
Press H2 button. In the Mode menu, press F3 button to enter the Playback mode. Set the frame range
7.
and Playmode .Then, press H5 button to play.
8.
To save the wave recorded, press H2 button. In the Mode menu, press F4 button to choose Storage, then
set the range of frames to store, press H4 button to save.
9.
To load the waveform from the internal memory, press Load, and then enter playback mode to analyze
the wave.
27.2. How to Implement the Auxiliary System Function Setting
27.2.1. Config
Press the Utility button and turn the M knob to select Config to go to the following menu.
Fig. 52 Wave Storage
Fig. 53 Configuration Menu
-138-
Hide quick links:
Advertisement
Table of Contents
