PeakTech 1240 Operation Manual page 46

After the USB disk is installed, press the Save panel button, the save menu is displayed at the bottom of
2.
the screen.
3. Press the H1 button, the Type menu will display at the left of screen, turn the M knob to choose Image for
Type.
4. Press the H4 button, the input keyboard used to edit the file name will pop up. The default name is current
system date. Turn the M knob to choose the keys; press the M knob to input the chosen key. The length
of file name is up to 25 characters. Choose and press the Enter key of the keyboard to end the input and
store the file with the current name.
Switch between capital and small
Tip:
After the above step 3, which set the Type of the save menu as Image, you can save the current screen image
by just pressing the COPY button in any user interface. The data format is BIN, which can be edited using the
enclosed device software
27.1. How to Record/Playback Waveforms
Wave Record function can record the input current wave. You can set the interval between recorded frames in
the range of 1ms~1000s.The max frame number reaches 1000,and you can get better analysis effect with
playback and storage function.
Wave Record contains four modes: OFF, Record, Playback and Storage.
Record: To record wave according to the interval until it reaches the end frame set.
Close the keyboard
Fig. 49
-135-
Delete the last character
End and store