PeakTech 1240 Operation Manual page 48

Playback: Play back the wave recorded or saved.
Playback menu shows as follows:
Menu Setting
Start frame
End frame
Playback Mode
FrameSet Cur frame
Interval
Loop
Play mode
Once
Play
Operate
Stop
Storage: Save the current wave according to the start frame and end frame set.
Storage menu shows as follows:
Menu Setting
Start frame
Storage
Mode
Frame Set End frame
Save
Load
Instruction
Turn the M knob to select the number of start frame to playback
(1 ~ 1000)
Turn the M knob to select the number of end frame to playback
(1 ~ 1000)
Turn the M knob to select the number of current frame to playback
(1 ~ 1000)
Turn the M knob to select the interval between played back frames
(1 ms ~ 1000 s)
Play back the wave continuously
Play back the wave just one time
Begin to record
Stop recording
Fig. 51 Wave Playback
Instruction
Turn the M knob to select the number of start frame to
store (1~1000)
Turn the M knob to select the number of end frame to store
(1~1000)
Save the waveform record file to the internal memory
Load the waveform record file from the memory
-137-