en
For your safety
in a safe way and if they understand the hazards involved. Children
shall not play with the appliance. Do not leave the running appliance
unattended.
Connect and operate the appliance only in accordance with the
specifications on the rating plate. Only use indoors. Do not use
the appliance if the power cord and / or appliance are damaged.
Before replacing accessories or additional parts, which move during
operation, switch off the appliance and disconnect from the power
supply. Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
Safety instructions for this appliance
A Risk of injury
A Electric shock risk
Do not insert mains plug until all preparations for working with the
appliance are complete. Never immerse the base unit in liquid or
hold under running water. Do not use a steam cleaner. Do not adjust
the swivel arm while the appliance is switched on. Wait until the
drive has come to a standstill. Do not change tool / accessory until
the drive is at a standstill – when the appliance is switched off, the
drive continues running briefly. Use only the rotary switch to switch
the appliance on or off. When the appliance is not in use, pull out the
mains plug. Before eliminating a fault, pull out the mains plug.
A Risk of injury from the rotating tools!
Keep hands clear of rotating parts. While the appliance is operating,
never place fingers in the mixing bowl. Attach the cover (12) before
operating the appliance! Do not change tools until the drive has
come to a standstill – when the appliance is switched off, the drive
continues running briefly and stops in the tool change position. Do
not move the swivel arm until the tool has come to a standstill. For
reasons of safety the appliance cannot be operated unless unused
drives are covered with drive guards (5, 8). Before attaching /
removing the continuous-feed shredder, wait until the drive has come
to a standstill and pull out the mains plug. Do not reach into the feed
tube.
A Risk of injury from sharp blades!
Do not grip the sharp blades or edges of the cutting discs. Take hold
of cutting discs by the edge only. Do not touch blender blades with
bare hands.
4