52 COLLISION INFORMATION
Upper Load Path Beam
NOTE: Right side shown, left side typical
1 OUTER LOAD PATH BEAM
2 INNER LOAD PATH BEAM
3 COWL TAB (DO NOT CUT)
4 SECTIONING CUT LINE INNER LOAD PATH BEAM
NOTE: When cutting the Inner Load Path Beam care should be taken as to not cut the Cowl Tab (3) or surround
ing components
With the Outer Load Path Beam (1) removed, cut the Inner Load Path Beam (2) along sectioning cut line (4) stopping
at the bottom of the Cowl Tab (3).
Fig. 26 Upper Load Path Beam
2012 FF