Fiat 500 Collision Awareness Manual page 122

122 COLLISION INFORMATION
WARNING: Betamate Adhesive is not typical structural adhesive and requires welding procedure duplicate
strength of the joint.
NOTE: Right side shown, left side typical
1 ­ SILL REINFORCEMENT
2 ­ INNER B­PILLAR REINFORCEMENT
D ­ BETAMATE ADHESIVE (FOLLOW ALL WARNINGS AND PROCEDURES)
Betamate joint requires separate welding requirements that can be found in Betamate Replacement Procedures as found
in, (Refer to Collision Information ­ Standard Procedure).
Fig. 79 Sill Reinforcement
2012 FF