2012 FF
DECAL INSTALLATION
PreDecal Application
CAUTION: Dirt and defects located in the decal application area will adversely effect appearance and adhesion
of the decal(s)
NOTE: Vehicle body must be at least 21° C (70° F) during application process
1. Ensure the vehicle is clean and dry.
2. Inspect the vehicle's paint finish to be certain that no paint defects, such as dirt, runs etc., exist in the areas the
decals are to be applied. If defects do exist repair accordingly.
Decal Application
1. Use wax and grease remover, per manufacturer rec
ommendation, to clean the surface(s) where decal(s)
will be located.
2. Clean the application area with isopropyl alcohol
applied to a clean lint free cloth or use alcohol prep
wipes.
COLLISION INFORMATION
29