2012 FF
WARNING: Betamate Adhesive is not typical structural adhesive and requires welding procedure duplicate
strength of the joint.
NOTE: Right side shown, left side typical
Collision Information SIDE APERTURE
2 DRAIN TROUGH
3 REAR HEADER
C SEAM SEALER
D BETAMATE ADHESIVE (FOLLOW ALL WARNINGS AND PROCEDURES)
Betamate joint requires separate welding requirements that can be found in Betamate Replacement Procedures as found
in, (Refer to Collision Information Standard Procedure).
Fig. 98 Drain Trough (Cabrio)
COLLISION INFORMATION
141