Setting The User Privileges For Operating The Camera - Sanyo VA-SW3050Lite Instruction Manual

■ Setting the user privileges for operating the camera (Edit Authentication)
You can configure the user privileges for operating individual cameras.
Select a user from the [User ID] list in the [User Registration] screen, and then click [Edit].
The [Edit Authentication] screen appears. The [Edit Authentication] screen lists all of the registered
cameras.
7
When granting the operating privilege, select the
corresponding check box under the operation
item, click [Apply] and then click [OK].
For the detailed operating privileges, see page
14.
1 Live view
For monitoring live video.
2 Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(1)
For transmitting voice from PC to camera
(Talk).
3 Playback
For playing recorded video.
Note: Even if this privilege is set, it is invalid
on VA-SW3050Lite.
4 Record
For recording live video.
Note: Even if this privilege is set, it is invalid
on VA-SW3050Lite.
5 Camera Control . . . . . . . . . . . . . . . . . . .(1)
For operating the camera remotely.
6 Camera Menu Setup. . . . . . . . . . . . . (1, 5)
For enabling/disabling the "MENU" button
provided on the camera controller.
7 Menu Setup
For configuring settings for the [Options] menu.
Note: Only set this operating privilege for
administrative level users.
1 2 3 4
E
MEMO:
• In the default settings, all check boxes except
7 are selected.
• When you set the operating privileges 2, 5
or 6, the privileges enclosed in parentheses
will also be automatically set. When
deselecting operating privileges that are
automatically set, deselect the originally set
operating privileges.
Operation Buttons
A [Select All] button
Selects the check boxes for all cameras in the
column corresponding to the button.
B [Clear All] button
Deselects the check boxes for all cameras in
the column corresponding to the button.
C [Apply] button
Saves the settings.
D [Cancel] button
Cancels the settings.
E [OK] button
Completes setting and closes the screen.
Note:
In the case of the user "admin", all
administrative user operating privileges are set
as default. The operating privileges cannot be
changed.
32
5 6
A
B
D C
English