Using The Camera Search Function - Sanyo VA-SW3050Lite Instruction Manual

Hide thumbs Also See for VA-SW3050Lite:
Table of Contents

Advertisement

■ Using the Camera Search Function

The camera search function automatically retrieves the IP addresses for all cameras connected to the network.
This function configures the IP addresses all at once for the cameras found, eliminating the need to
enter IP addresses manually.
MEMO:
At the time of factory shipment, the IP address for every camera is set to "192.168.0.2". When you
connect multiple cameras with the factory setting, use the camera search function to configure the
unique IP address to the cameras.
Note:
• When the confirmation dialog on firewall appears while performing the camera search function,
disable the firewall function to allow the connection to the camera (see page 7).
• The camera search function may detect network devices other than cameras.
1
Click [Search Camera].
The MAC and IP addresses for the cameras
detected are listed in the [Search Camera]
dialog. The addresses are displayed in the
order of the MAC addresses.
2
2
If there are any overlapping IP
addresses, in the [Search Camera]
dialog, select the camera(s) for which
the IP address needs to be changed and
click [Edit].
The [Edit IP Address] dialog appears.
1
5
10
3
Enter new IP address.
4
To change the camera's IP address, set
appropriate values corresponding to the
default gateway and subnet mask values
configured on the PC.
4
Click [OK].
The new IP address is transferred to the
camera.
The [Edit IP Address] dialog closes, and the
IP address in the [Search Camera] dialog is
also updated.
Use the same procedure (steps 2 to 4) until
there are no overlapping addresses remaining.
5
Click [OK] in the [Search Camera] dialog.
This operation closes the [Search Camera]
dialog, and all the IP addresses displayed in
the [Search Camera] dialog are
automatically reflected in the [Camera
Setting] screen.
Note:
If there are any overlapping IP addresses,
the "IP Address Duplication Error!!"
message is displayed. When this error
occurs, configure the IP address again.
3
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents