Sanyo VA-SW3050Lite Instruction Manual page 22

Operating the Cameras
6 Remote alarm button
Sends an alarm signal from the
camera's alarm output terminal.
• The button is displayed in red
during the alarm output.
The alarm output duration
depends on the settings on the
camera.
MEMO:
• In order to operate the alarm output
remotely, set the ALARM OUT of the
camera to "REMOTE".
• For models with two or more alarm output
terminals, this feature applies to ALARM1
only.
7 Wheel zoom button
Enables or disables the
wheel zoom function.
• You can zoom in and out
English
with the mouse wheel.
8 CLIPPING VIEW button
MEMO:
• Unlike the digital zoom function of the
camera, this feature does not have an
effect on the output signal of the camera or
the images recorded.
• Using this button to perform zooming
disables the context menu normally
available by right-clicking on a selection.
21
Turns on or off the clipping
view function.
• You can increase or
decrease the zoom
magnification power of
live image in
incremental steps by
clicking the mouse.
Left-click increases and
right-click decreases the
zoom magnification
power.
• When the clipping view
function is enabled, the
screen shows "Clipping
View".