Sanyo VA-SW3050Lite Instruction Manual page 25

Note:
When the VA-51LAN option board is used, if
[Resolution] is set to "640x480", the audio
setting (step 2) cannot be performed.
(When selecting "640x480", the voice
setting is disabled automatically. When a
value other than "640x480" is set, specify
the settings of the option board and this
screen again.)
4
Specify the image quality in [Quality]
column.
Image quality can be selected at five levels.
MEMO:
• The image quality set on the camera is
displayed as default.
If no image quality is set on the camera,
"Enhanced" is the default value.
• The image quality is fixed to "BITRATE"
and cannot be changed here, if
"BITRATE" is set on the camera.
5
Click [SET].
This completes the setting procedure and
the settings are transferred to the camera.
Clicking the [Set All] button in the title line at
the top executes the [SET] command to all
the cameras.
6
Click [Close].
Close the [Normal Recording & Live Setting
(JPEG)] screen.
Function of Other Operation Buttons
1 [Reload] button
Reloads and displays the selected camera's
setting information.
Note:
When registering cameras on two or more
PCs
If you don't want to change the contents set in
the camera, after inputting the IP address and
camera password, load the current setting
information using the [Reload] button.
2 [View Camera] button
Displays the still image from the camera you
selected (see page 11).
3 [Copy] button
Copies the settings for the selected camera
and retains them in memory.
4 [Paste] button
Overrides the settings for the selected
camera with the copied contents.
5 [Paste All] button
Overrides the settings for all cameras with the
copied contents.
6 [Web browser] button
Starts the Web browser to automatically
access the selected camera.
Refer to the option board instruction manual
for operations following access.
MEMO:
The function of each button is the same on both
the [Live Setting (H.264)] and the [Audio Setting]
screens.
24 English