Registering Users Accessing The Camera; User Registration - Sanyo VA-SW3050Lite Instruction Manual

Registering Users Accessing the Camera

■ User registration

You can register up to ten users (including "admin" user) to log in to the VA-SW3050Lite.
1
2
3
B
In the menu bar, click [Options] and select [Others]. Then select [User Registration].
The [User Registration] screen appears. (See the above figure.)
1
Enter the user ID.
The user ID can be up to 16 alphanumeric
characters. The user ID is case sensitive.
2
Enter the password.
The password can be from 4 to 16
alphanumeric characters. The password is
case sensitive.
3
Enter the same password again for
confirmation.
4
Click [Add].
The new user is added to the [User ID] list
(A).
English
4 5
When you register multiple users, repeat
steps 1 to 4.
MEMO:
To configure the operating privileges for
individual users, select the user in the [User ID]
list (A) and click [Edit] (B) under [Advanced
Setup].
The [Edit Authentication] screen appears (see
page 32).
5
Click [OK].
Click the [OK] button to complete the
registration and close the [User
Registration] screen.
MEMO:
The notations which can be used for user ID and
password are colon (:), period (.), slash (/) and
asterisk (*).
29
A