Configuring The Image Conditions; Configuring The Jpeg Image Conditions <Normal Recording & Live Setting (Jpeg) - Sanyo VA-SW3050Lite Instruction Manual

Configuring the Image Conditions

You can configure the image conditions of live video for each camera.
Specify the resolution and quality according to the image compression format.
■ Configuring the JPEG image conditions – <Normal Recording & Live Setting (JPEG)>
2
1
1
● Select [Options] → [Normal Recording & Live Setting (JPEG)] in the menu bar.
The [Normal Recording & Live Setting (JPEG)] screen appears. (See the above figure.)
Note:
• If the [No.] check box on the [Camera Setting] screen is not selected, the settings on this screen are
not available (see page 9-8).
• The [Recording] setting is not available in the VA-SW3050Lite.
1
Click the camera number you want to
specify.
The color of the clicked camera row
changes.
2
To establish voice communication,
select the [Audio] check box.
The voice port information set in the camera
is reloaded to establish voice
communication.
Selecting the check box in the title line at
the top selects all check boxes in [Audio]
column.
Note:
To configure the voice settings, both the
camera and the option board must support
the voice communication feature.
English
3
2 3 4
4
5 6
3
Specify the resolution in [Resolution]
column.
Specify the resolution for the camera.
MEMO:
• The numeric values displayed on the
pull-down menu differ depending on the
option board type.
• The resolution of the DFFC mode can be
specified when the VA-80LAN option
board is used.
Example: 720x480 DFFC
(Refer to "What is DFFC Function?" on
page 26.)
23
5
6