Tool Bar Functions - Sanyo VA-SW3050Lite Instruction Manual

■ Tool bar functions

In the VA-SW3050Lite, the buttons used for record and playback operations (5, 6, 9) are grayed out
and cannot be operated.
If you need these features, use the VA-SW3050 server/client software, which is optionally available.
1 2 3
1 Screen mode selection button
When selecting the full screen mode, the live
video is maximized across the display without
the title and menu bars displayed.
Full screen
Normal screen
MEMO:
If you select the [Camera Title] or [Data/Time]
check box under the Display settings, the
camera title and the date and time
information will be also displayed in the full
screen mode.
2 Split screen mode selection button
The three modes are available for split screen
display.
Single screen mode
4-part split screen mode
9-part split screen mode
16-part split screen mode
MEMO:
In 4-part, 9-part or 16-part split screen mode,
double-clicking a specific video will display
the video in single screen mode.
3 Auto screen change button
Use this button to display all the pages
sequentially at specified intervals in the order
of the page number.
Enables or disables the auto
screen change function.
Sets the page switching
intervals as 1, 2 or 3 seconds.
4 5 6 7 8 9
4 Screen change buttons
5 [Live All] button
6 [Alarm] button
7 Print button (Print)
8 Button for displaying the camera
16
F G
MEMO:
• When the auto screen change function is
enabled, no operations can be executed
apart from setting the page switching interval.
To perform any other operations, disable this
function.
• The total number of pages depends on the
number of the cameras and the split screen
mode.
Switches the displayed page forward or
backward.
Goes back to the page before.
Goes to the next page.
The currently displayed page and
total number of pages.
Not available for the VA-SW3050Lite.
Not available for the VA-SW3050Lite.
This button allows you to print out the image
from live video or recorded video.
Displays the dialog for printing out
the image.
controller (see page 20)
Displays the camera controller to operate the
camera remotely from PC.
Displays the camera controller.
Note:
Cannot be operated when no camera is
selected.
H I
English