Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the
3
Follow the procedure from step 1 to step 3 in
4
Remove the
5
Remove the
6
Remove the
7
Remove the battery.
8
Remove the
9
Follow the procedure from step 1 to step 17 in
10 Remove the
11 Remove the
Procedure
1
Using a plastic scribe, pry the camera module from the display back-cover.
2
Disconnect the camera cable from the camera module.
base
cover.
wireless
card.
solid-state
drive.
rear-I/O
cover.
computer
base.
memory
modules.
display
assembly.
display
bezel.
computer. After working inside your
After working inside your
"Removing the hard
"Removing the system
computer.
drive".
board".
107