Replacing The Camera Cable; Procedure; Post-Requisites - Alienware 15 R3 Service Manual

Replacing the camera cable

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Procedure

1 Adhere the camera cable to the display back-cover.
2 Using the alignment posts, place the camera module on the display back-
cover.
3 Connect the camera cable to the camera module.

Post-requisites

1 Replace the
2 Replace the
3 Replace the
4 Follow the procedure from step 2 to step 16 in
5 Replace the
6 Replace the battery.
7 Replace the
8 Replace the
9 Replace the
10 Follow the procedure from step 4 to step 6 in
11 Replace the
12 Replace the
98
display panel.
display bezel.
display assembly.
memory modules.
computer base.
rear-I/O cover.
solid-state drive.
wireless card.
base cover.
computer. After working inside your
After working inside your
"Replacing the hard
"Replacing the system
computer.
board".
drive".