Using The Tether - Britax PIONEER User Manual

Using the Tether

WARNING!
• Attach the tether only to tether anchors identified by your
vehicle manufacturer as tether anchorage points.
• If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or contact
your vehicle man u fac tur er for assistance. DO NOT modify
your vehicle without advice from your vehicle manufacturer.
• The top tether MUST be used in harness mode for children
that weigh more than 65 lbs (29.5 kg). BRITAX recommends
that the top tether be used at all times when installing the
child seat. Using the top tether will improve the stability of
your child seat and reduce the risk of injury.
Tether anchor locations vary
from vehicle to vehicle. Check
your vehicle owner's manual
and look for the tether anchor
symbol shown in the diagram
to help identify where the top
tether anchor point is located
in your vehicle.
To attach the tether to a tether anchor:
Remove the webbing from the
1
elastic strap and loosen the
tether.
Firmly press the hook over the
2
a tether anchor point.
IMPORTANT: Use the elastic strap to contain extra webbing. Always
ensure any excess webbing is contained within your vehicle.
Child Seat Functions
OR
OR
OR
OR
27