Britax PIONEER User Manual page 39

3.
Switchable Retractor in ALR Mode with Sliding Latch Plate
Has a latch plate that freely
a
slides along the vehicle belt
webbing.
Has a retractor that can be
b
switched to function as an
ALR by pulling the vehicle
belt fully out until a clicking
sound can be heard when
retracting.
* To use a child seat with this
type of vehicle belt, you will
need to switch to the ALR
mode or use a locking clip.
4.
ELR (Emergency Locking Retractor) with a Sliding Latch Plate
Has a latch plate that freely
a
slides along the vehicle belt
webbing.
Has a retractor that locks
b
only in an emergency
situation such as sudden
stop or crash.
IMPORTANT: This belt type
requires the use of a locking
clip to secure the seat during installation. A locking clip must be
secured approximately 1 in. (2.5 cm) from the latch plate to secure
the child seat. Call BRITAX Consumer Services at 1-888-427-4829
or 1-704-409-1699 to obtain a locking clip.
5.
Switchable Retractor with Sewn Latch Plate and Inflatable Seat Belt
NOTE: This BRITAX car seat may not be compatible with every
inflatable lap-shoulder belt. See FAQS in the support section of the
BRITAX website (www.britaxusa.com/support) for additonal instruc-
tions.
Has a latch plate that is
a
sewn into the webbing.
Has a retractor that can be
b
switched to function as an
ALR by pulling the vehicle
lap belt fully out until a
clicking sound can be
heard when retracting.
NOTE: To use a child seat with
this type of vehicle belt, you will
need to switch the retractor for
the lap section of the seat belt
to the ALR mode.
Vehicle Compatibility
Latch
Plate
Inflatable Lap
Shoulder Belt
Latch
Plate
37