Britax PIONEER User Manual page 17

Pull seat cover forward.
1
Pull the vehicle belt out and
2
route along the green belt
path. Verify that the belt is not
twisted and then buckle.
Push the child seat firmly
3
into the vehicle seat while
removing all slack from the lap
part (a) and the shoulder part
(b) of the vehicle belt.
* Ensure that the vehicle belt is
locked as directed by your
vehicle owner's manual.
* The child seat is secure when
it cannot be moved front-to-
back or side-to-side more than
1 in. (2.5 cm) at the belt path.
If the child seat is not secure,
repeat the installation procedure
or use a different seating
location.
Firmly press the tether hook
4
over a designated vehicle
tether anchor. Remove slack.
Secure excess webbing with
5
the elastic strap.
Checklist
9 Check all connections and verify that child seat is secure.
* The child seat is secure when it cannot be moved front-to-
back or side-to-side more than 1 in. (2.5 cm) at the belt path.
If the child seat is not secure, repeat the installation procedure
or use a different seating location.
9 Check that any excess tether webbing is contained within
your vehicle and secured in the elastic strap.
Installing the Child Seat: Harness Mode
2
OR
OR
15