Britax PIONEER User Manual page 15

Pull seat cover and seat pan
1
forward to access the lower
connectors.
Route the lower connector
2
strap along the green belt path
behind the seat pan and firmly
press the lower connectors
onto their adjacent lower
anchors.
* Verify that the strap is not
twisted.
Push the child seat firmly
3
into the vehicle seat while
removing any slack from the
lower connector strap to
remove slack.
* The child seat is secure when
it cannot be moved front-to-
back or side-to-side more
than 1 in. (2.5 cm) at the belt
path. If the child seat is not
secure, repeat the installation
procedure or use a different
seating location.
Firmly press the tether hook
4
over a designated vehicle
tether anchor. Remove slack.
Secure excess webbing with
5
the elastic strap.
Checklist
9 Check all connections and verify that child seat is secure.
* The child seat is secure when it cannot be moved front-to-
back or side-to-side more than 1 in. (2.5 cm) at the belt path.
If the child seat is not secure, repeat the installation procedure
or use a different seating location.
9 Check that any excess tether webbing is contained within
your vehicle and secured in the elastic strap.
Installing the Child Seat: Harness Mode
OR
OR
13