Putting The Surftab Into Recovery Mode/Loading Factory Settings - TrekStor SurfTab theatre 13.3 Operating Instructions Manual

g) Tap "e
naBLe WireLess dispLay
The SurfTab searches for all available Miracast devices nearby
and then displays them as a list.
h) Tap your television on the list. The SurfTab establishes a
connection to the selected device.
A short while later your television will display the screen of your
SurfTab.
i
NOTE
To interrupt the connection between the SurfTab and your
television, tap "e
WiFi function on your SurfTab.
23) Reset and recovery mode
Resetting the SurfTab (Reset)
If the SurfTab "freezes" and no longer responds, you can reset it.
Carefully push a narrow, but not sharp object (such as a bent
paperclip) briefly into the reset hole (see Section 6, point H).
r
WARNING
Never use needles, pins or other pointed or sharp objects to
perform a reset!
The SurfTab turns off, resets and restarts.
r
WARNING
Saved files will not be lost if the SurfTab is reset.
Putting the SurfTab into recovery mode/loading
factory settings
"Recovery-Modus" allows you to load factory settings, delete
forgotten passwords or delete the memory of the SurfTab, for
instance.
" in the drop-down window.
nable wireleSS diSplay
" again or deactivate the
46 EN