Table of Contents
Advertisement
18) Activating standby mode
If you do not want to use your SurfTab for a while, press the on/off switch briefly
to put the SurfTab into standby mode and save power. To exit standby mode,
briefly press the on/off switch again.
Once you have reactivated the SurfTab, it will initially display the lock screen.
Place your finger on the lock symbol and drag it to the right to the open lock.
Your SurfTab will now display the home screen.
If you previously set up a screen lock, you must now identify yourself using the
i
method that you chose in order to unlock the SurfTab.
Standby mode is activated automatically when the SurfTab is not used for
i
a certain time. You can specify the period of time after which the SurfTab
automatically goes into standby mode under "S
19) Reset and recovery mode
Resetting the SurfTab (Reset)
If your SurfTab freezes and no longer responds, you can force a shutdown by
pressing and holding the on/off switch for approximately 10 seconds. Then you
can switch the SurfTab on again as usual.
Putting the SurfTab into recovery mode/loading the factory settings
The "recovery mode" allows you to reset the device to its factory settings, delete
forgotten passwords or delete the memory of the SurfTab, for instance.
As system-related settings can be specified in recovery mode, you should only use
a
this mode if you have the necessary technical knowledge.
a)
Please switch off your SurfTab.
b) Press the "volume control +" button and keep it pressed.
c)
Also press the on/off switch and keep it pressed.
d) As soon as the TrekStor logo and "powered by android" appear, release
both buttons.
e) The display now shows a preselection of available options.
f )
Use the volume buttons to select the "R
selection by pressing the on/off switch.
EN
24
"
"d
+
ettingS
iSpLay
" menu item and confirm your
ecoveRy
"
"S
".
+
Leep
Advertisement
Table of Contents
