TrekStor SurfTab theatre 13.3 Operating Instructions Manual page 43

d) In the Bluetooth menu top right, use the tip of your finger
to move the slider for Bluetooth from left to right. The word
"o " appears in the top left of the screen.
n
The SurfTab searches for all available Bluetooth devices nearby
and then displays them as a list.
e) Tap the device that you wish to connect to. The SurfTab
establishes a connection with the selected device and sends
what is known as a "B
want to connect to.
e) Check that the code displayed on the device to be connected
matches the code displayed on the SurfTab and confirm on
the SurfTab by tapping "p
i
NOTE
You may also have to confirm the pairing procedure on the
device you want to connect to.
f ) Once a connection has been established, the connected
device appears at the very top of the SurfTab Bluetooth
menu under the heading "p
g) Exit Settings by returning to the start screen (see Section 9).
h) Open the file explorer app ("F
menu.
i) Scroll to the image you want to send via Bluetooth.
j) Tap the image to open it.
k) The following symbol is located in the bottom left of the
image:
l) Tap the symbol. A selection of options for sending the image
will appear.
m) Select the "B
A list of all connected Bluetooth devices appears.
Luetooth pairing code
air
" option by tapping the respective icon.
Luetooth
" to the device you
".
".
aired deVices
e ") in the Applications
iLe xpLorer
43 EN