Table of Contents
Advertisement
Standby mode is activated automatically when the SurfTab is not used for a certain
i
time. You can specify the period of time after which the SurfTab automatically goes
into standby mode under "S
21) Reset and recovery mode
Resetting the SurfTab (Reset)
If your SurfTab freezes and no longer responds, you can force a shutdown by
pressing and holding the on/off switch for approximately 10 seconds. Then you
can the SurfTab switch on again as usual.
Putting the SurfTab into recovery mode/loading the factory settings
The "recovery mode" allows you to reset the device to its factory settings, delete
forgotten passwords or delete the memory of the SurfTab, for instance.
As system-related settings can be specified in recovery mode, you should only use
a
this mode if you have the necessary technical knowledge.
a)
Please switch off your SurfTab.
b) Press the "volume control -" button and keep it pressed.
c)
Also press the on/off switch and keep it pressed.
d) As soon as the TrekStor logo appears, release both buttons.
e) The SurfTab now displays the recovery mode menu.
f )
Use the volume control buttons to navigate through the menu and use the
on/off switch to select an option.
To restore the SurfTab to its factory settings, select the option "
i
Confirm your selection in the following menu by selecting "y
WARNING: All the files that you have stored (photos, text files, bookmarks and so on)
and the settings that you have specified (background, passwords and so on) will
be deleted.
g) To exit the recovery mode, use the volume button to select the "
option and confirm by pressing the on/off switch. Your SurfTab now exits
the recovery mode and restarts.
22) Switching off the SurfTab
a)
Press the on/off switch for approximately two to four seconds to switch off
the device.
b) Tap "p
oWeR oFF
"
ettingS
".
"d
"
"S
".
+
+
iSpLay
Leep
/
Wipe data
factory reSet
--
eS
deLete aLL uSer data
Reboot system noW
27
".
".
"
EN
Advertisement
Table of Contents
