Table of Contents
Advertisement
Putting the SurfTab into recovery mode/loading the factory settings
The "recovery mode" allows you to reset the device to its factory settings, delete
forgotten passwords or delete the memory of the SurfTab, for instance.
a As system-related settings can be specified in recovery mode, you should only use
this mode if you have the necessary technical knowledge.
a)
Please switch off your SurfTab.
b) Press the "Volume -" button and keep it pressed.
c)
Please also press the on/off switch and keep it pressed.
d) As soon as the TrekStor logo appears, release the on/off switch.
e) A little while later, the recovery mode menu is displayed. You can now
release the "Volume -" button.
f )
Use the volume control buttons to navigate through the menu, and use the
on/off switch to select an option.
To restore the SurfTab to its factory state, select the "
i
Confirm your selection by pressing the on/off switch. Complete the command in
the following menu by selecting "y
way.
WARNING: All the files that you have stored (photos, text files, bookmarks and so
on) and the settings that you have specified (background, passwords and so on)
will be deleted.
g) To exit recovery mode, use the volume button to select the "
" option and confirm by pressing the on/off switch. Your SurfTab will
noW
now exit recovery mode and will restart.
22) Switching off the SurfTab
a)
Press the on/off switch for approximately two to four seconds to switch off
the device.
b) Tap "p
oWeR off
c)
The following message will appear: "p
Tap "ok" to confirm and switch off the SurfTab.
EN
30
".
Wipe data
--
eS
deLete aLL uSer data
/y
oWeR off
ouR tablet Will shut doWn
/
" option.
factorS reSet
" and confirm in the same
Reboot system
.".
Advertisement
Table of Contents
