Switching On The Surftab - TrekStor SurfTab theatre 13.3 Operating Instructions Manual

8) Starting up the SurfTab for the first time
Charging the SurfTab
Please fully charge your SurfTab before you use it for the first time.
To charge the SurfTab, connect the DC plug on the power
adapter supplied to the charging socket (DC IN) on the SurfTab.
Then plug the power adapter into a socket.
i
NOTE
Only leave the power adapter connected to the power socket
until the SurfTab is fully charged. Disconnect the power
adapter from the power socket first and then remove the
charging cable from your SurfTab.
i
NOTE
The maximum battery life is reached after approximately
10 charging cycles.
i
NOTE
The battery should be recharged to between 40 and 60 per
cent every 6 months or so if the SurfTab is not being used.

Switching on the SurfTab

Press the On/off switch for about 5 seconds to switch on the
SurfTab. The SurfTab starts up.
A setup assistant appears directly after the tablet has started up
for the first time. Follow the setup assistant's instructions to set
up your SurfTab.
During the setup process, the setup assistant will prompt you to
sign in with your Google account. In order to make full use of all
the features of the SurfTab, we highly recommend that you sign
in with your Google account at this point.
23 EN