TrekStor SurfTab theatre 13.3 Operating Instructions Manual page 47

r
WARNING
System relevant settings can be configured in recovery mode.
Only use recovery mode if you have the relevant technical
knowledge!
Proceed as follows to load recovery mode:
a) Switch off your SurfTab completely (see Section 24).
b) Once the SurfTab has switched off, press the "V
and hold it down.
c) Also press the On/off switch and hold both buttons down.
d) As soon as the TrekStor logo appears, release both buttons.
A few moments later the recovery mode menu appears.
Use both volume control buttons to navigate in recovery mode.
Briefly press the On/off switch on the device to select an option.
Proceed as follows to load factory settings:
r
WARNING
If you load factory settings, all the files saved on your SurfTab
(photos, text files, bookmarks, apps etc.) and all the settings
you have configured (background, passwords etc.) will be
deleted!
a) Navigate to "W
b) Confirm your selection by briefly pressing the On/off switch.
A new window appears in which you will be asked this
question in red: "W
c) Navigate to "y
pressing the On/off switch.
c) Navigate to "r
confirm your selection by briefly pressing the On/off switch.
/
ipe data Factory reset
ipe aLL data
" and confirm your selection by briefly
es
eBoot system noW
".
? this can not Be undone!"
" in the following window and
-" button
oLume
47 EN