Table of Contents
Advertisement
INDEX
Direct expansion unit configuration
Technical data
Reheat coil hot gas
Operating space
Optional base moulding
Intake plenum (under units)
Discharge plenum (over units)
Front outlet plenum (over units)
Front outlet base moulding (under units)
Direct free cooling plenum (under units)
Direct free cooling connection kit (under/over units)
Optinal air filter
Connection to brazed plate condenser
Correction factors
Liability disclaimer
This bulletin refers to standard executions, in particular for dimension, weight, electric, hydraulic, aeraulic and refrigerant connections
(whereas applicable). Contact Climaveneta Commercial Office for further drawings and schemes.
Climaveneta declines any liability derived from the bulletin's use.
This bulletin is of exclusive property of Climaveneta, and all forms of copy are prohibited.
The data contained herein are subject to variation without notice.
In some parts of this manual, the following symbols are used:
WARNING = for actions that require special care and
suitable preparation
PROHIBITED = for actions that absolutely MUST NOT
be performed
2
EN
3
3
4
8
9
Electrical connections
9
Minimum cross-sections of the power supply cables
14
14
Electrical connection of the outdoor air-cooled
15
condenser BRE and/or the outdoor dry cooler BDC
16
17
21
21
22
22
Calibrating the air flow sensor
23
Calibrating the dirty filter sensor
23
23
Servomotor and hot water valve
24
24
Humidifier
24
25
Humidifier and condensate drain
25
Condensate drain pump and humidifier drain pumpe
26
26
Condensate drain pump for high water temp.
27
(humidifier)
27
28
32
Dismantling
32
AW-AT-AF
32
36
Specialist personnel (electrician)
Person with in-depth knowledge and experience such as to
be able to recognise risks and avoid dangers that may derive
from electricity (IEV 826-09-01).
ACCURATE AX - AW - AD - AT - AF
37
38
39
40
40
41
41
48
49
50
51
52
53
53
53
54
54
59
59
61
61
62
62
63
64
65
65
66
Hide quick links:
Advertisement
Table of Contents
