Lenovo ThinkCentre E93z Hardware Maintenance Manual page 96

10. Insert the HDMI cable
cable clip 2 . Reconnect the USB cable
I/O assembly downward as shown.
Figure 29. Connecting the HDMI and USB cables
11. Insert the two tabs on the rear I/O assembly into the corresponding holes in the chassis. Position the
rear I/O assembly on the chassis so that the screw holes in the rear I/O assembly are aligned with those
in the chassis. Install the two screws to secure the rear I/O assembly to the computer.
Figure 30. Installing the rear I/O assembly
12. Install the VESA mount bracket. See "Removing and reinstalling the VESA mount bracket" on page 87.
92
ThinkCentre E93z Hardware Maintenance Manual
1 into the corresponding hole in the rear I/O assembly, and then secure the HDMI
3 to the connector 4 on the rear I/O assembly. Turn the rear