Lenovo ThinkCentre E93z Hardware Maintenance Manual page 95

8. Disconnect the power cable
wire from the chassis. Then remove the rear I/O assembly from the computer.
Figure 27. Removing the rear I/O assembly
9. To reinstall the new rear I/O assembly, reconnect the power cable
earth wire with the corresponding hole in the chassis. Then install the screw
Figure 28. Connecting the power cord cable and securing the earth wire
1 from the power cable 2 . Remove the screw 3
1 and the power cable
3
Chapter 9
to disconnect the earth
2 . Align the
to secure the earth wire.
91
.
Replacing FRUs