Vga Display Identification; Dvi Display Identification; Usb Support; Ddc /Ci Support And Smart Manage/Control - Philips 220V3SB/00 Service Manual

24"(16:9)
Note 1 :
a. D-SUB mode,
Normal node to Power saving mode: 15/s (typ.)
Power saving mode to Normal: 4/s(typ.)
b. DVI mode,
Normal node to Power saving mode: 15/s(typ.)
Power saving mode to Normal: 3.8s(typ.)
Note 2 :
Measurement power Saving.
3.9

VGA Display identification

In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability

3.10 DVI Display identification

In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3

3.11 USB support

Connect the upstream port of the monitor to host PC's USB port via USB cable. Then attach
external device to the downstream port of the monitor. Check if the device can work properly.

3.12 DDC /CI Support and Smart Manage/Control

In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with ,
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.

3.13 Pivot function(Auto pivot)

It needs to support AUTO PIVOT function with SmartControl PC application tool.

3.14 Hot-key definition

M3 OSD Button
definition _ 20110823

3.15 Smart image

Smart Image.doc
0.1
2011/08/31
1920x1080
measurement of Power consumption
power saving.pdf measure the way -090
220V3 series
PHILIPS
34
22"W LCD Monitor
63 of 25
63
220V3 LCD