Meridian 2
77
measurement of
power saving.pdf
4.8
VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
4.9
DVI Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3
4.10 DP Display identification
4.11 USB support
Connect the upstream port of the monitor to host PC's USB port via USB cable. Then attach
external device to the downstream port of the monitor. Check if the device can work properly.
4.12 DDC /CI Support and Smart Manage/Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with ,
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.
4.13 Pivot function(Auto pivot)
It needs to support AUTO PIVOT function with SmartControl PC application tool.
4.14 Hot-key definition
见如上OSD TREE FW SPEC
4.15 Smart contrast (Dynamic contrast ratio)
Smart Contrast is a kind of dynamic backlight control.
This function changes the panel backlight dynamically according to the frame brightness histogram.
At least the minimum contrast ratio has to be> 20,000,000:1 (typ.)(LED),500,000(LAMP)
Power consumption
measure the way -090