Meridian 8
74
开机功耗(动态态
1
画面测试)
CC170CW
8 LCD
待机模式功耗
2
C
关闭模式功耗
3
C
3.7.4 MEPS (For Australia and Newland )power consumption spec
This Standard specifies the minimum energy performance standards (MEPS) and energy
rating label requirements for computer monitors.
Test method
and specification as below
能耗模式
Item
开机功耗(动态态
1
画面测试)
待机模式功耗
2
关闭模式功耗
3
3.8
VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9
DVI Display identification
3.10 HDMI Display identification (HDMI : No MHL function)
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3
3.11 DP Display identification
3.12 DDC /CI Support and Smart Manage/Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with ,
Philips Smart Manage, Smart Control v1.4.0.5, and Portrait Display Tune at least.
3.13 Hot-key definition
Refer to hot-key definition
Smart contrast
3.14
This function changes the panel backlight dynamically according to the frame brightness histogram.
At least the minimum contrast ratio has to be > 50M:1 (Typ.)
3.15 Smart image
SmartImage Profile
Definitions(M2).doc
<23W
<34KWH
<0.3W
<0.3W
Power consumption
<15.5W
<0.3W
<0.3W
Smart Contrast is a kind of dynamic backlight control.
CEC 值
<71 KWH
A<0.38
星级
5.5 星