Vga Display Identification; Dvi Display Identification; Usb Support; Ddc /Ci Support And Smart Manage/Control - Philips 226V3LSB/00 Service Manual

Meridian 3
84
Power saving mode to Normal: 3.8s(typ.)
Note 2 :
Measurement power Saving.

VGA Display identification

In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability

DVI Display identification

In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3

USB support

Connect the upstream port of the monitor to host PC's USB port via USB cable. Then attach
external device to the downstream port of the monitor. Check if the device can work properly.

DDC /CI Support and Smart Manage/Control

In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with ,
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.

Pivot function(Auto pivot)

It needs to support AUTO PIVOT function with SmartControl PC application tool.

Hot-key definition

D:\ENG\monitor
projects\spec\H8\hot k

Smart image

(formerly FGA, FACTORY GAMMA Alignment)

PerfectTune II

A. PerfectTune must be done after warming 30 minutes at least.
B. PerfectTune must be performed after Auto Color.
C. PerfectTune must be conducted through DVI or scaler embedded patterns.
D. Delta E < 2.5

audio

3.17.1
The amplifier and speaker combination shall provide a frequency response of 300 Hz to
20 kHz, with +/- 3 dB variation over the entire response range.
measurement of
power saving.pdf
Smart Image.doc
Frequency Response
Power consumption
measure the way -090