Camera Installation And Gimbal Balancing - Ikan Beholder EC1 Calibration Manual

1.0 Camera Installation and Gimbal Balancing

Items Needed:
-Camera
-Ikan Beholder Gimbal
-Screwdriver – flat head
The gimbal cannot be properly calibrated if it is not balanced with a camera installed. To balance your gimbal,
follow the steps that are outlined below.
Gimbal balancing steps:
Before installing the camera and adjusting the balance, remove the camera lens cover, attach the lens hood,
and insert a memory card and camera batteries, as well as any other accessories. The camera should be fully
ready to shoot.
STEP 1: Mount the camera quick release
• Remove the quick release plate from the gimbal.
• Attach the quick release plate to the camera.
• Make sure the quick release plate direction is facing forward toward the lens.
2