Advertisement
Operation - Docking
DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE,
NOTE: Ensure a proper connection by aligning the tablet's
Alignment Sockets with the Docking Station's Alignment Posts
Alignment Posts
DS-GTC-500 Series Docking Station
1)
Hold computer with bottom angled toward Docking Station. Lower
computer into the bottom of the Docking Station.
2)
While keeping downward pressure on the computer, pivot it into Docking
Station so the handle snaps into Latch Mechanism.
CHECK ALIGNMENT OF TABLET ON DOCKING STATION.
Alignment Sockets
Bottom of Getac RX10 Rugged Tablet
9
Advertisement
