Advertisement
Cable Management
1)
Tip the Docking Station to a position that is comfortable to work with.
2)
Install all cables that are necessary for computing needs.
3)
Use Zip Ties (Hardware Kit Item 1) and the Strain Relief Points on the bottom of
the Docking Station to secure cables and reduce risk of accidental disconnects.
4)
Create a service loop with cables to ensure that no tension is on the
connectors and to enable intended motion.
5)
Tie off cables onto a stationary part of the mounting system.
This loop must be large enough
to allow full range of expected
rotation and extension without
stressing connections.
8
Collect cables and secure
to the mounting system.
(Note: Mounting system not included)
Advertisement
