Disassembling The Lcd Display - NEC Versa S800 Disassembly Manual

6. Carefully lift the LCD display off the system and put it aside.

Disassembling the LCD Display

To disassemble the LCD display, first remove the LCD display (see
Display), then perform the following steps:
1. Remove the four rubber bumpers and the three stickers that cover the screws in the
marked location of Fig. 16:
Fig. 16: Removing Rubber bumpers and stickers covering the screws
2. Remove the screws uncovered in Fig. 16:
3. Carefully unclip the LCD cover and put it aside.
4. Remove the 2 screws holding the inverter board in place (Fig. 17:
5. Remove, on both sides of the LCD assembly, the two screws marked in Fig. 18:
Fig. 17: Removing the inverter board screws
Fig. 18: Removing the LCD back cover screws
NEC Versa S800 Disassembly Manual
Removing the LCD
Rubber
bumpers
Stickers
A=(M2x3)
black
B=(M2.5x4)
black
M2x3
black
M2x3
Page 12