13. Set the Auto switch on the take-up reel to the Backward position.
14. Press the OK button on the printer.
You are now ready to print with the auto take-up reel.
Parent topic:
Using the Optional Auto Take-up Reel
Related references
Setup Menu Settings
Take Up with the Printable Side In
After you attach the roll core on the optional auto take-up reel, follow these steps to take up media with
the printable side in.
Note: Make sure Auto Cut is set to Off when you use the auto take-up reel.
1. Press the
load/remove paper button on the printer.
2. Select Use Take-up Unit and press the OK button.
Paper automatically feeds until the edge of the roll media reaches the roll core.
3. Wind the edge of the media around the back of the roll core.
68