Using the Auto Take-up Reel
See these sections to use the auto take-up reel with your product.
About the Optional Auto Take-up Reel
Take Up with the Printable Side In
Take Up with the Printable Side Out
Removing Media from the Optional Auto Take-up Reel
Parent topic:
About the Optional Auto Take-up Reel
The optional auto take-up reel automatically rolls up printed media as you print.
You can use the auto take-up reel for media with the printable side in (on the left) or printable side out
(on the right).
It is best to do the following when using the auto take-up reel:
• Make sure that the end of the roll is cut straight across.
• Load media with the printable side in.
• Use a take-up roll core that is the same width as your media so the core does not bend or take up
media incorrectly.
Parent topic:
Take Up with the Printable Side In
After you attach the roll core on the Auto Take-up Reel as described in the documentation that came with
the Auto Take-up Reel, follow these steps to take up media with the printable side in.
Note: Make sure Auto Cut is set to Off when you use the Auto Take-up Reel.
Media Handling
Using the Auto Take-up Reel
59