Epson p10000 User Manual page 194

LCD screen message Condition/solution
Paper Feed Sensor The paper feed sensor is dirty. Clean the sensor.
Error
Refer to the manual to
find out how to solve the
problem.
Perform Powerful You have not cleaned the print head nozzles in six months and Timer
Cleaning on all nozzles. Cleaning is set to Off.
Run a Powerful Cleaning cycle in the Administrator menu.
Maintenance Request A part used in the printer is nearing the end of its service life. Contact Epson
for support and provide them with the displayed maintenance request code.
Replace Part
The error persists until you replace the requested part.
Soon/Replace Part Now
(maintenance request
code)
Call For Service A call for service occurs when:
(service code) • The power cable is not connected securely
Power off and then on. If • An error occurs that cannot be cleared
this doesn't work, note
When a call for service has occurred, the printer automatically stops printing.
the code and call for
Turn off the printer, disconnect the power cable from both the outlet and the
service.
printer, and reconnect them. Turn the printer on and off several times. If the
same call for service is displayed on the LCD screen, contact Epson for
support and provide them with the displayed service code.
Parent topic: Solving Problems
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Related references
Print Quality Options - Windows
Color Management Options - Windows
Output Resolution Settings - Mac
Advanced Color Settings - Mac
Paper Menu Settings
194