Epson p10000 User Manual page 192

LCD screen message Condition/solution
Reel Unit Disconnected The optional Auto Take-up Reel is not connected. Reconnect the unit and
select No on the LCD screen to turn off the printer. Wait a moment, then turn
Auto Take-up Reel Unit
the printer on.
is disconnected. Do you
continue? To continue printing without the Auto Take-up Reel, select Yes on the control
panel.
Take-Up Error The optional Auto Take-up Reel cannot take up media.
Is anything obstructing Check the optional Auto Take-up Reel sensor and clear any obstructions,
the take-up reel sensor then press the OK button on the control panel.
system?
If there is any loose paper on the Auto Take-up Reel roll core, set the Auto
switch to Off and hold the Manual switch in the take-up direction to remove
slack in the roll paper. Confirm that the paper is attached to the roll core
correctly, then return the Auto switch to the original position and press the
OK button.
HDD Error The inserted hard drive is not formatted or is formatted for another printer.
HDD used for another You must format an internal print server that has been used with another
printer needs to be printer before using it with your product. Select Yes on the LCD screen to
formatted. Continue? format the drive or you will not be able to print with the internal print server.
Storage Error The internal print server cannot store the current print job.
Check if hard disk unit is
Press the
correctly installed.
reinstall the internal print server.
If the message still appears, contact Epson for support.
To continue printing regardless of the internal printer server's status, select
Print only from the Hard Disk Unit menu in the printer driver.
Data Size Error The internal print server can store individual print jobs that are up to 100GB
in size. To print larger jobs, select Print Only from the Hard Disk Unit menu
Data size of print job is
in the printer driver.
too large. Check on print
job.
pause/cancel button and select Job Cancel, then remove and
192