18. Close the front cover.
19. Press the OK button.
The print head returns to the printing position and the printer cleans the print head.
20. When the print head cleaning is complete, turn the printer off.
Note: If you see an error message on the LCD screen, select Cancel and clean the print head
manually. Then turn the printer off and back on.
Parent topic:
Replacing the Cutter
If you notice that your paper does cut cleanly, you may need to replace the cutter.
1. Remove any paper from the printer.
2. Select the
3. Press the Menu button.
4. Select Cutter Maintenance and press the OK button.
5. Select Replace Cutter and press the OK button.
6. Press the OK button.
The cutter moves to the replacement position.
Maintenance
Maintenance tab
183