Step 2 - Positioning The Movement Sensor - Angelcare AC417 Owner's Manual

STEP 2 - POSITIONING THE MOVEMENT SENSOR

Note: If you have model AC410, AC510 (no Sensor Pad) you can skip to
Page .
9
2.1 - POWERING THE MOVEMENT SENSOR PAD
1) When using the Sensor Pad for the first time, you will need to insert the provided
CR3032 battery.
2) Remove the battery cover using a coin. Turn in the direction of the arrow.
3) Place the included battery (CR3032) in the compartment.
Note: The + symbol should be facing up.
4) Replace the battery cover (the two dots will line up). The Sensor Pad is now ON.
5) Verify the wireless sensor pad icon is on the status bar of your Parent Unit.
2.2 - INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT
8
Sensor Pad
2
1) Remove the mattress from the crib.
2) Place the Sensor Pad - printed side up -
in the center of the mattress. It should
be centered on the hardboard if your
crib requires a hardboard support.
3) Replace the mattress.