Angelcare AC417 Owner's Manual page 13

TO ACTIVATE THE SENSOR PAD:
2
3
TO TEST THE SENSOR PAD:
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
MOVEMENT ALARM
• Alarm activates when no movement
is detected by the Sensor Pad for
20 seconds.
• Both the Parent Unit and the
Camera speakers will emit warning
sound.
• Movement Alarm icon will show on
the LCD screen.
1) Tap the screen anywhere to bring up the
menu.
2) Tap the Settings Icon
3) Tap the Sensor Pad Icon
4) Tap the Sensor Pad Toggle button to
4
activate the Sensor Pad (the toggle
button will turn blue).
5) Tap the Save Icon at the bottom of the
5
screen (Icon will turn blue)
1) After activating the Sensor Pad, the alarm
should go off after 20 seconds.
2) Rub you hand over the mattress and confirm
the alarm stops.
.
IF THE ALARM DOES NOT SOUND
• Avoid contact with the crib while
Sensor Pad is in operation.
• Place the crib near a supporting wall to
reduce vibrations.
• Adjust the Sensor Pad sensitivity level.
• Turn OFF crib mobile, fans, loud
music or anything else that may cause
vibration.
E
N
.
13