Ports Display; Time Display - evertz hd9084 Instruction Manual

3.2.3.

Ports Display

Press PORTS repeatedly to cycle through the Ports front panel displays.
PORTS
Push the PORTS
button to cycle
through ports
display options.
C:---- T:---- - (default setting)
Indicates which communications port is controlling the insertion or blocking of caption data onto each
CEA-608 caption service. The characters following the 'C:' represent services CC1 through CC4. The
four characters following the 'T:' represent services Text1 through Text4. The last character by itself
represents the XDS service.
Each character will be a letter representing the port (A-F) that has control over captions on that service,
or a dash '-' indicating that no port is controlling the respective service.
Example display: C:ABB- T:ABBD A
This example shows: Port A is inserting/blocking captions on CC1, Text1, and XDS.
inserting/blocking captions on CC2, CC3, Text2 and Text3. Modem D is inserting/blocking captions on
Text4.
A232 B232 C232
Indicates whether the respective serial port (A-C) is configured for RS-232 or RS-422 communications.
Ports A, B, and C are configured to the RS-232 setting from the factory. Please refer to sections
2.1.4.4 and 2.1.4.5 to reconfigure the ports.
GPI abcDefG (example Display)
This display indicates which GPI's are asserted. The example above shows GPI d and g are in the
active state. An asserted GPI will be displayed in uppercase letters.
3.2.4.

Time Display

Press TIME repeatedly to cycle through the Time front panel displays.
OPERATION
HD9084 HDTV Caption Encoder Manual
C: - - - - T: -
A 232 B 232 C
example display
GPI a b c d e f g
Port B is
Page 3-11