Buzzer Volume; Brightness Of Lcd; Contrast Of Lcd; Delayed Start - Electrolux DIVA 60 cm Service Manual

4.3.7

Buzzer volume:

When this option is set, it remains set until the setting is changed. The option is used to vary the volume of
the buzzer and of the vocal messages from 0 to 5. The "buzzer disabled" icon appears on the display when
the setting is "0". The alarm vocal messages remain always active even if the selected level is "0".
4.3.8

Brightness of LCD:

When this option is set, it remains set until the setting is changed. It is used to set the brightness of the back
of the LCD from "0" (minimum setting) to "10" (maximum setting).
4.3.9

Contrast of LCD:

When this option is set, it remains set until the setting is changed. It is used to set the contrast between the
back and the writings of the LCD from "0" (minimum setting) to "10" (maximum setting).

4.3.10 Delayed start:

This option enables the user to delay the start of the washing cycle and the relative options. A dedicated
button is assigned to this option.
To select a "delayed start" time:
1. Close the door and turn the appliance on by pressing button S0
LED L0 lights up
The LCD lights up with a welcome message and is then set to the cycle selection mode
2. Press the DELAY START button
The delayed start time flashes on the display
Every time the button is pressed, the delayed start time increases by 1 hour up to a maximum of 19
hours [1 hr – 2 hrs .....19 hrs...0 hr]
3. Choose the programme and any options desired:
The time remaining to the end of the cycle appears momentarily on the display
4. Press "OK/START" button O5 to confirm the settings
5. The "delayed start" time now begins:
The time set now appears steadily on the display while the icon on the third line flashes to indicate
the countdown: the time decreases by hours [19 hrs – 18 hrs – 17 hrs .....1 hr] and then by
minutes during the final hour [1 hr - 59 min – 58 min... 0]
NB: During the countdown (until the machine starts), the "delayed start" time can be changed or zeroed by
pressing the DELAY START button.
6. When the countdown is over, the machine starts automatically
"Time to end of cycle" now appears on the display, along with the step in progress and the relative
temperature.
NB: The delayed start time can be set after the wash programme has been selected.
(2)
15
(5)